1910.28(a) · General. ; 1910.28(b)(2) · Hoist areas. The employer must ensure: ; 1910.28(b)(3) · Holes. The employer must ensure: ; 1910.28(b)(4) · Dockboards.
최대 적립 포인트는 11pay 포인트 적립, T플러스포인트 적립 혜택을 대상으로 최대로 받을 수 있는 예상 적립액입니다.
Does your workplace leverage ladders? Make sure you’re following the latest OSHA ladder safety guidelines to keep your employees safe and your company in compliance.
Part Number: 1910 ; Part Number Title: Occupational Safety and Health Standards ; Subpart: 1910 Subpart D ; Subpart Title: Walking-Working Surfaces ; Standard Number: 1910.23 ; Title: Ladders. GPO Source: e-CFR
QUICK CA DTM Portable Ladder Safety Falls from portable ladders (step, straight, combination... S. Department of Labor www.osha.gov (800) 321-OSHA (6742) O S H A 3 2 4 6 - 1 0 N - 0 5
by OSHA standards or the Occupational Safety and Health (OSH) Act. Pursuant to the OSH Act... FALLING OFF LADDERS CAN KILL: USE THEM SAFELY 3 When Should You Use a Ladder? When you want to...
Non-self-supporting ladders, which must lean against a wall or other support, are to be positioned at such an angle that the horizontal distance from the top support to the foot of the ladder is about 1⁄ · 4 the working length of the ladder. (Figure 2.) ; In the case of job-made wooden ladders, that angle should equal about 1⁄ · 8 the working length. This minimizes the strain of the load on ladder joints that may not be as strong as on commercially manufactured ladders.
Unlocked ladder spreaders • Standing on the top step or top cap • Loading ladder beyond... 5—Ladder Safety Requirements (Not an OSHA standard, included to be used as guidance to meet...
Define terms such as floor opening, standard railing, standard toeboard, floor hole, and wall opening. They will be able to identify safety requirements to help prevent walking and working surface hazards related to general housekeeping floors, walls, open-sided surfaces, stairways, ladders, and scaffolding. Gain a thorough understanding of mechanical hazards and the importance of safeguarding machines. They will have learned about different types of guards and devices that will protect them as they work. Employees will understand OSHA standard ...
1910.29(a) · General requirements. The employer must: ; 1910.29(c) · Safety net systems. The employer must ensure each safety net system meets the requirements in 29 CFR part 1926, subpart M. ; 1910.29(e) · Covers. The employer must ensure each cover for a hole in a walking-working surface: ; 1910.29(f)(2) · Finger clearance. The minimum clearance between handrails and any other object is 2.25 inches (5.7 cm).